Manual sunquest tanning bed how to#

How to Get Rid of White Shoulder Blades in a Tanni.

List of Medications That Interfere With the Tannin.

The Differences Between a Natural Tan & a Tanning.

What Happens If You Don't Wear the Goggles in a Ta.

Sunquest Tanning Bed Installation Instructions.

How to Repair Cracks in an Acrylic Tanning Bed.

How to Change a Tanning Bed From a T-Max to a 220.

How to Replace a Starter on a Tanning Bed.

Why Does the Tanning Bed Make You Happy?.

How do I Troubleshoot Sunquest Tanning Beds?.

Frequently Asked Questions About Tanning Beds.

How to Remove Acrylics in a Tanning Bed.

You should change the bulbs in the Sunquest tanning bed once they have been in use for 400 to 500 hours. Insert the new bulbs by pressing them into the bulb location and twisting slightly. In general, you will unscrew the clear plastic shield, and then gently twist each long light tube out of the bed. Refer to the manufacturer's instructions for bulb replacement on your specific Sunquest model. Replace the bulbs in the tanning bed if they flicker or appear dull. If the locks are secure, call in a technician to service the tanning bed and replace the gas springs. Loose locks cause the canopy to continually fall shut. Locate the threaded canopy locks on the hinge of the bendable arms and twist them clockwise to ensure they are not loose. In addition, the electrical circuit should be able to handle a minimum of either 15 or 20 amps, depending on your tanning bed model.

According to the manufacturer, the Sunquest beds should be on their own circuit, with no other devices or appliances plugged into the outlets. If the normal room temperature is above 80 degrees, the bed could overheat.Д¬all an electrician and have himexamine the electrical circuit if the tanning bed continually shuts off or trips a fuse. Place a thermometer in the room where the Sunquest tanning bed is located to make sure the room temperature is 80 degrees or lower when the tanning bed is not running. Placing the tanning bed closer than this will cause it to feel very hot and could overheat. Measure the distance between the back of the tanning bed and the wall to ensure there is at least 6 inches of space. If you experience problems with your Sunquest tanning bed, there are several troubleshooting steps you can perform to identify the problem's cause. Wolf Tanning Bed's Sunquest line come in a variety of models.